v2! E3D v6 integrated top plate for Rostock Max V2
FilenameDownloadsSizeUploaded
7-15-2016 3-18-57 PM.png422189 kBon 15/7/16 Download
7-15-2016 3-58-25 PM.png4116122 kBon 15/7/16 Download
TOP_072016.stl3480168 kBon 23/7/16 Download
IMG_20160722_210000 (1).jpg2992511 kBon 26/7/16 Download
Description
*V2 updates* Designed to: 1. Reuse the stock fasteners. 2. Reuse the stock bottom plate. 3. Reuse the stock stand offs. 4. Incorporate press-in *6-32* threaded inserts from McMaster P/N *92395A113*, 3 EA. 5. Firmly clamp hot end gland w/ 0.5mm detent features. 6. use nylon cable ties through rib features to retain cables.
Instructions
Print with 3 layers on all external surfaces. Print w/ intervals of 0.5mm layer height. Install brass inserts from the bottom with the split side facing out. Install a fastener backwards to expand the insert into the part before assembly. Assemble e3d fan assembly oriented over cartridge clamp. Insert assembly with fan facing away from clamp opening, then install to rostock bottom plate w/ original hot end hardware.
License
Attribution - Non-Commercial - Share Alike
Comments
Sign in to add a comment.