Universal stand-alone filament spool holder (Fully 3D-printable)
CreativeTools
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| all parts_200x200x115_mm_build_volume.stl | 1056 | 10.8 MB | on 30/11/14 | Download |
| all_parts_makerbot_replicator_2_and_2x.stl | 1116 | 10.8 MB | on 30/11/14 | Download |
| assembly (complete).stl | 1095 | 10.8 MB | on 30/11/14 | Download |
| base for printrbot.stl | 1092 | 1.6 MB | on 30/11/14 | Download |
| base on 2020 al beam extrusion.stl | 984 | 1.5 MB | on 30/11/14 | Download |
| base on 2525 al beam extrusion.stl | 1085 | 1.7 MB | on 30/11/14 | Download |
| base on 3030 al beam extrusion.stl | 1074 | 1.7 MB | on 30/11/14 | Download |
| base on 4020 al beam extrusion.stl | 1065 | 1.6 MB | on 30/11/14 | Download |
| bearing wheel.stl | 1023 | 47 kB | on 30/11/14 | Download |
| centerring and locking cone.stl | 1084 | 833 kB | on 30/11/14 | Download |
| centerring_and_locking_cone_(flat_base).stl | 1080 | 840 kB | on 30/11/14 | Download |
| guide-tube holder and filament filter.stl | 1031 | 1.8 MB | on 30/11/14 | Download |
| guide-tube_holder_and_filament_filter_(shorter).stl | 1081 | 1.9 MB | on 30/11/14 | Download |
| spool spindle.stl | 1087 | 2 MB | on 30/11/14 | Download |
| spool_spindle_200mm_tall.stl | 1044 | 2 MB | on 30/11/14 | Download |
| spool-less coil holder (attachment).stl | 971 | 629 kB | on 30/11/14 | Download |
| spool-less coil holder (main).stl | 1113 | 1.3 MB | on 30/11/14 | Download |
| tripod base.stl | 1079 | 3.3 MB | on 30/11/14 | Download |
| universal stand-alone filament spool holder (fully 3d-printable) v01.jpg | 1182 | 1.5 MB | on 30/11/14 | Download |
| universal stand-alone filament spool holder (fully 3d-printable) v00.jpg | 1133 | 1.5 MB | on 30/11/14 | Download |
| universal stand-alone filament spool holder (fully 3d-printable) v02.jpg | 1157 | 1.3 MB | on 30/11/14 | Download |
| universal stand-alone filament spool holder (fully 3d-printable) v13.jpg | 1215 | 1.6 MB | on 30/11/14 | Download |
Description
A fully 3D-printable rotating stand for filament spools, designed to be easily made without the need for fasteners such as screws, nuts, shafts, glue, etc. Every single component in this spool holder comes right from your 3D printer's filament.
The spool holder's spindle is shaped to fit the vast majority of commonly used filament spools with shaft holes ranging from 16 mm to 62 mm in diameter. It is also compatible with spool-less filament coils.
The spindle which holds the spool's weight rotates on its own roller wheels, which makes it turn effortlessly.
The spool holder included an arm for filament guide tubes of both common sizes 1.75 mm and 3.0 mm. The arm also contains a pocket for inserting a piece of sponge which acts a a filament filter - thus keeping the filament clean and lubricated.
FEATURES
- Easy to 3D print
- Needs no glue or fasteners
- All parts can be 3D-printed
- Fits almost any filament spool size
- Has built-in filament filter!
- Can also hold spool-less filament coils
Next time you need a new filament spool holder, just 3D-print one! :)
VIDEO
http://youtu.be/X6ArZeWYSZE
Instructions
INSTRUCTIONS
http://bit.ly/1z5hr5t
License
Attribution - Creative Commons
Tags
Comments
Sign in to add a comment.