SeeMeCNC Orion printer enclosure

mikespray
Full Name
mike spray
Location
kalamazoo michigan
Company
Laser Abilities / 3D Engineering Services
Filename | Downloads | Size | Uploaded | |
---|---|---|---|---|
2014-12-27 16.34.23.jpg | 1157 | 1.3 MB | on 29/12/14 | Download |
bottom back.stl | 1011 | 13.2 MB | on 29/12/14 | Download |
bottom left.stl | 1009 | 13.3 MB | on 29/12/14 | Download |
bottom right.stl | 966 | 13.2 MB | on 29/12/14 | Download |
door handle.stl | 993 | 1.5 MB | on 29/12/14 | Download |
door hinge.stl | 967 | 979 kB | on 29/12/14 | Download |
latch.stl | 969 | 1.1 MB | on 29/12/14 | Download |
top 2 a.stl | 935 | 8.6 MB | on 29/12/14 | Download |
top 2 b.stl | 964 | 8.6 MB | on 29/12/14 | Download |
top 2 c.stl | 991 | 10.5 MB | on 29/12/14 | Download |
top 2 d.stl | 1002 | 10.5 MB | on 29/12/14 | Download |
top back.stl | 981 | 14.6 MB | on 29/12/14 | Download |
top left.stl | 964 | 11.8 MB | on 29/12/14 | Download |
top right.stl | 1154 | 14.7 MB | on 29/12/14 | Download |
orion enclosure.pdf | 1045 | 507 kB | on 29/12/14 | Download |
2014-12-27 22.06.29.mp4 | 1409 | 40.8 MB | on 29/12/14 | Download |
Description
here is my design for a printer enclosure for the Orion printer. all parts can be made on this printer (some will say they are too big, but they will print) see the pdf notes on the plexiglas sizes and the trimming needed on 2 of the parts.
Instructions
i drilled the top parts through the top plate and attached with small bolts. you could use screws instead.
License
Attribution - Creative Commons
Tags
Comments
Sign in to add a comment.