3D Printed and Carbon Fiber QuadCopter
jimustanguitar
Full Name Jim
Location SeeMe Territory
Company yeah right
FilenameDownloadsSizeUploaded
IMG_5733.jpg5961.7 MBon 2/6/15 Download
IMG_5737.jpg5951.6 MBon 2/6/15 Download
IMG_5742.jpg5761.8 MBon 2/6/15 Download
IMG_5756.jpg5821.8 MBon 2/6/15 Download
IMG_5762.jpg6231.7 MBon 2/6/15 Download
IMG_5771.jpg5801.7 MBon 2/6/15 Download
03 - 1LBZRuQ.png5581.8 MBon 2/6/15 Download
09 - 8wd9Qo9.png5771.9 MBon 2/6/15 Download
10 - RkwrKOF.png5841.9 MBon 2/6/15 Download
12 - ihdPOx1.png6021.6 MBon 2/6/15 Download
21 - Z5WNQcU.png5412.1 MBon 2/6/15 Download
22 - 3Ps3w83.png5702.1 MBon 2/6/15 Download
24 - YkwzrvP.png5771.9 MBon 2/6/15 Download
36 - v9vNfIn.png5912 MBon 2/6/15 Download
79 - vPvXL1i.png5512.1 MBon 2/6/15 Download
Battery Hanger.stl453186 kBon 2/6/15 Download
Bottom Bracket.stl429851 kBon 2/6/15 Download
Flight Controller Holder.stl432549 kBon 2/6/15 Download
Frame Bottom.stl4409.5 MBon 2/6/15 Download
Frame Spacer.stl45213.1 MBon 2/6/15 Download
Frame Top.stl43611.8 MBon 2/6/15 Download
Isolator Mold.stl4491 MBon 2/6/15 Download
Landing Gear.stl4532.8 MBon 2/6/15 Download
Motor Mount Bottom.stl4616.6 MBon 2/6/15 Download
Motor Mount Spacer.stl45513 MBon 2/6/15 Download
Motor Mount Top.stl4506.3 MBon 2/6/15 Download
Wire Clip.stl440164 kBon 2/6/15 Download
Description
Quadcopter designed around carbon fiber arrow shafts. All points where plastic and carbon interface float on rubber o-rings. Flight controller is isolated by silicone anti-vibration balls cast in a 3D printed mold. Full instructions and build log on Instructables: http://goo.gl/wD0f3K and Wevolver: https://goo.gl/c7IN7y
Instructions
I printed my parts at .2mm layer heights and around 15% infill. You can fill the parts more to make them stronger, or less to make them lighter.
License
Attribution - Share Alike - Creative Commons
Comments
Sign in to add a comment.