3D Printed and Carbon Fiber QuadCopter
jimustanguitar
Full Name Jim
Location SeeMe Territory
Company yeah right
FilenameDownloadsSizeUploaded
img_5733.jpg8381.7 MBon 2/6/15 Download
img_5737.jpg8711.6 MBon 2/6/15 Download
img_5742.jpg8471.8 MBon 2/6/15 Download
img_5756.jpg8321.8 MBon 2/6/15 Download
img_5762.jpg8891.7 MBon 2/6/15 Download
img_5771.jpg7961.7 MBon 2/6/15 Download
03 - 1lbzruq.png8151.8 MBon 2/6/15 Download
09 - 8wd9qo9.png8221.9 MBon 2/6/15 Download
10 - rkwrkof.png8401.9 MBon 2/6/15 Download
12 - ihdpox1.png8841.6 MBon 2/6/15 Download
21 - z5wnqcu.png8462.1 MBon 2/6/15 Download
22 - 3ps3w83.png8442.1 MBon 2/6/15 Download
24 - ykwzrvp.png7951.9 MBon 2/6/15 Download
36 - v9vnfin.png8492 MBon 2/6/15 Download
79 - vpvxl1i.png9552.1 MBon 2/6/15 Download
battery hanger.stl659186 kBon 2/6/15 Download
bottom bracket.stl604851 kBon 2/6/15 Download
flight controller holder.stl619549 kBon 2/6/15 Download
frame bottom.stl7519.5 MBon 2/6/15 Download
frame spacer.stl64613.1 MBon 2/6/15 Download
frame top.stl64811.8 MBon 2/6/15 Download
isolator mold.stl6861 MBon 2/6/15 Download
landing gear.stl6702.8 MBon 2/6/15 Download
motor mount bottom.stl7126.6 MBon 2/6/15 Download
motor mount spacer.stl67413 MBon 2/6/15 Download
motor mount top.stl6606.3 MBon 2/6/15 Download
wire clip.stl637164 kBon 2/6/15 Download
Description
Quadcopter designed around carbon fiber arrow shafts. All points where plastic and carbon interface float on rubber o-rings. Flight controller is isolated by silicone anti-vibration balls cast in a 3D printed mold. Full instructions and build log on Instructables: http://goo.gl/wD0f3K and Wevolver: https://goo.gl/c7IN7y
Instructions
I printed my parts at .2mm layer heights and around 15% infill. You can fill the parts more to make them stronger, or less to make them lighter.
License
Attribution - Share Alike - Creative Commons
Comments
Sign in to add a comment.