|eggchair.stl||467||1.9 MB||on 15/7/15||Download|
Who wouldn't feel inspired (in some way) by sitting in one of these? My mix on a classic and geometry to fit the parameters of printing on the big printer.
Warming up the PartDaddy to 215C with PLA resin pellets, print at 2mm layers and 5mm extrusion width with 4mm nozzle. About a 40 to 50mm/s print speed with a first layer of 12mm/s on tape.
Attribution - Share Alike - Creative Commons
Sign in to add a comment.