Pumpkin Alphabet
dassmilytier
FilenameDownloadsSizeUploaded
happy-halloween.jpg1379234 kBon 28/10/15 Download
trick-or-treat.jpg130868 kBon 28/10/15 Download
a.stl12871.9 MBon 28/10/15 Download
b.stl12771.9 MBon 28/10/15 Download
c.stl12901.9 MBon 28/10/15 Download
d.stl12841.9 MBon 28/10/15 Download
e.stl12552 MBon 28/10/15 Download
f.stl12662 MBon 28/10/15 Download
g.stl12592 MBon 28/10/15 Download
h.stl12821.9 MBon 28/10/15 Download
i.stl13272 MBon 28/10/15 Download
j.stl12821.9 MBon 28/10/15 Download
k.stl12932 MBon 28/10/15 Download
l.stl12931.9 MBon 28/10/15 Download
m.stl12782 MBon 28/10/15 Download
n.stl12541.9 MBon 28/10/15 Download
o.stl13191.9 MBon 28/10/15 Download
p.stl12861.9 MBon 28/10/15 Download
q.stl12971.9 MBon 28/10/15 Download
r.stl13091.9 MBon 28/10/15 Download
s.stl13392 MBon 28/10/15 Download
t.stl12991.9 MBon 28/10/15 Download
u.stl12621.9 MBon 28/10/15 Download
v.stl12731.9 MBon 28/10/15 Download
w.stl13082 MBon 28/10/15 Download
x.stl13752 MBon 28/10/15 Download
y.stl13312 MBon 28/10/15 Download
z.stl13322 MBon 28/10/15 Download
Description
Wonder if you can build your own halloween themed led string lights? Yes, you can. Decide for your message (or faces), scale them down to whatever fits your needs best and print them out. Letter by letter. You can also place them next to your door to display a message. With the cap from the template pack, you can easily print a holder for your tea lights. Please use a LED powered light, as a normal candle might be too hot for the plastic. The pumpkins origin from the templates uploaded [http://repables.com/r/664/]. Therefor you can also combine them with the other parts related to this template. For example the faces or bodies from the figures [here].
Instructions
Make sure to figure out the size of the pumpkin and downsize them. The original size is 6 inches, which is far to much for a string light but might be fitting for a spooky message placed on the ground. Use the original cap template (don't forget the down-scaling) for the light chain holders, by drilling an appropriate hole into the cap or model the hole before printing. Unfortunately a can't do that for you as the diameter of the hole has to be fixed, while the scaling might vary. You will need support material for the roof of the pumpkin as well as for the letters. If you like, you can slice the pumpkin in the middle and try to print them that way. This should reduce the overall needed support but you have to glue them together properly later on.
License
Attribution - Creative Commons
Comments
Sign in to add a comment.