58mm solar filter for DSLR
FilenameDownloadsSizeUploaded
flange × 60 — female (3D).png16267 kBon 14/3/19 Download
flange × 60 — male (3D).png15927 kBon 14/3/19 Download
hood × 60 — (3D).png15916 kBon 14/3/19 Download
flange × 60 — female (3D).scad1530655 byteson 14/3/19 Download
flange × 60 — male (3D).scad1536616 byteson 14/3/19 Download
hood × 60 (3D).scad1560781 byteson 14/3/19 Download
Mennon DV-S 58.scad1551904 byteson 14/3/19 Download
flange × 60 — female (3D).stl15691.8 MBon 14/3/19 Download
flange × 60 — male (3D).stl15941.8 MBon 14/3/19 Download
hood × 60 (3D).stl16021.1 MBon 14/3/19 Download
DSC00147.jpg963849 kBon 15/3/19 Download
DSC00132.jpg9781.3 MBon 15/3/19 Download
DSC00133.jpg9431.4 MBon 15/3/19 Download
DSC00135.jpg9451.2 MBon 15/3/19 Download
DSC00137.jpg10071.1 MBon 15/3/19 Download
DSC00141.jpg988618 kBon 15/3/19 Download
DSC00143.jpg931501 kBon 15/3/19 Download
DSC00149.jpg1003676 kBon 15/3/19 Download
DSC00152.jpg999829 kBon 15/3/19 Download
DSC00155.jpg1038864 kBon 15/3/19 Download
54512472_112711946384373_2764298632717866594_n.jpg55710 kBon 23/3/19 Download
Description
58mm solar filter for DSLR
Instructions
Besides the printed parts you'll need: - AstroSolar® Safety Film OD 5.0 (https://www.baader-planetarium.com/en/solar-observation/astrosolar-safety-film-od-5.0-(20x29-100x50-117x117-cm).html) or it's alternative. - 58 mm screw-thread lens mount. I took my from a cheap replica of Mennon DV-S 58(http://www.mennon-usa.com/products/mennon-dv-s-58-screw-mount-58mm-digital-video-camcorder-lens-hood-with-cap-black.html). - Three 4×6 mm bolts (or similar) with nuts. - Cyanoacrylate glue ("Super Glue"). Print the parts with a heat-resistant white plastic tolerant to UV light and sandpaper them. Cut the bolting holes to fit your bolts. Cut a ø 70 mm circle (60 mm + 5 mm overlap) of the AstroSolar® Safety Film OD 5.0. Glue the film and one of the circle flange parts. Then glue the second flange part to the first so that the film is between two flanges. Cut the screw-threading part of the lens hood and sandpaper it too. Glue it to the triangle flange mount. Use bolts to connect the filter and the lens adapter together.
License
Attribution - Creative Commons
Comments
Sign in to add a comment.