SILICON WORM REPRODUCTION - MAKES TWO WORMS AT A TIME,- NEEDS 6MM BOLTS AND NUTS TO CLAMP TOGETHER - USE FINGER TIGHTENING WITH 4 WASHERS TO PREVENT CRACKS

- THE TWO HALVES OF THE MOLD GETS FITTED TOGETHER BY 2 BOLTS AND NUTS - THE RAW SILICON GETS PUSHED INTO THE INLET, - FILLS THE MOLD AND WHEN IT STARTS COMING OUT THE BREATHER HOLE ON OPPOSITE SIDE- IT IS FULL, AND NEEDS TO BE PLACED SOMEWHERE TO SET, TO RECOVER THE WORM, SPLIT THE BOX

Attribution - Creative Commons

FISHING, PRODUCTION, BAITMAKER, LURE, MOLD