SILICON WORM REPRODUCTION - MAKES TWO WORMS AT A TIME,- NEEDS 6MM BOLTS AND NUTS TO CLAMP TOGETHER - USE FINGER TIGHTENING WITH 4 WASHERS TO PREVENT CRACKS - THE TWO HALVES OF THE MOULD GETS FITTED TOGETHER BY 2 BOLTS AND NUTS - THE RAW SILICON GETS PUSHED INTO THE INLET, - FILLS THE MOULD AND WHEN IT STARTS COMING OUT THE BREATHER HOLE ON OPPOSITE SIDE IT IS FULL, AND NEEDS TO BE PLACED SOMEWHERE TO SET, TO RECOVER THE WORM, SPLIT THE BOX

Attribution - Non-Commercial - Share Alike

FISHING, PRODUCTION, BAITMAKER, LURE