NO SUPPORT needed - Roal The Bratty Dragon
RichRap
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| roal_front_display_large_display_large.jpg | 1180 | 823 kB | on 30/5/14 | Download |
| roal_left_display_large_display_large.jpg | 1173 | 896 kB | on 30/5/14 | Download |
| roal_parts_display_large_display_large.jpg | 1273 | 991 kB | on 30/5/14 | Download |
| roal_printed_display_large_display_large.jpg | 1192 | 855 kB | on 30/5/14 | Download |
| roal_right_display_large_display_large.jpg | 1160 | 888 kB | on 30/5/14 | Download |
| roal_on_printer_display_large_display_large.jpg | 1171 | 701 kB | on 30/5/14 | Download |
| roal_5pc_infill_end_display_large_display_large.jpg | 1272 | 638 kB | on 30/5/14 | Download |
| roal_5pc_infill_start_display_large_display_large.jpg | 1166 | 664 kB | on 30/5/14 | Download |
| roal_back_display_large_display_large.jpg | 1168 | 837 kB | on 30/5/14 | Download |
Description
I love this model, it's nicely detailed and very well made.
The original illustration by Splotchyink has a great blue dragon with a pink tummy,I wanted to re-create that in print, so he is sliced and printed then re-assembled.
He is printed with Faberdashery PLA - Electric Blue and
CHERRY BLOSSOM PINK.
Instructions
print each section and assemble.
This was also a test of hollow printing, one side was printed hollow (0% infill) and the other side was 5% Tummy was printed with 10% infill
He is 2 x the original size to show off all that great detail, you may want to scale him back down if you have a smaller print area.
You don't need to use any support to print this model. :)
License
Attribution - Share Alike - Creative Commons
Tags
Comments
Sign in to add a comment.