RotoMAAK Pulleys
FilenameDownloadsSizeUploaded
corner pulley.stl5953944 kBon 17/7/14 Download
small pulley.stl223 MBon 17/7/14 Download
top pulley .32 hole.stl207.8 MBon 17/7/14 Download
overdrive side pulley.stl08 MBon 10/8/14 Download
overdrive top puller.stl02.8 MBon 10/8/14 Download
Description
3 pulleys to print for the laser cut only RotoMAAK Kits
Instructions
these should print full scale, depending on the calibration of your printed, the corner pulley you will need 2 of them. 608 bearing should fit snug in the corner pulley. place bearing into pulley while it is still warm if bearing is not snug adjust scale until tight fit.
License
Attribution - Creative Commons
Tags
Comments
Sign in to add a comment.