Minion-Pumpkin
dassmilytier
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| minion-pumpkin.jpg | 1055 | 91 kB | on 30/10/15 | Download |
| explosion.jpg | 912 | 67 kB | on 31/10/15 | Download |
| arm-left.stl | 911 | 68 kB | on 30/10/15 | Download |
| arm-right.stl | 930 | 65 kB | on 30/10/15 | Download |
| braces.stl | 914 | 45 kB | on 30/10/15 | Download |
| foot-left.stl | 903 | 52 kB | on 30/10/15 | Download |
| foot-right.stl | 952 | 52 kB | on 30/10/15 | Download |
| hand.stl | 862 | 89 kB | on 30/10/15 | Download |
| pants.stl | 874 | 336 kB | on 30/10/15 | Download |
| pumpkin-bottom.stl | 949 | 1.3 MB | on 30/10/15 | Download |
| pumpkin-top.stl | 936 | 1.2 MB | on 30/10/15 | Download |
| binocular.stl | 899 | 221 kB | on 30/10/15 | Download |
| button.stl | 910 | 33 kB | on 30/10/15 | Download |
Description
This halloween-themed minion was ment to be another part mainly made from the template. As it turned out, minions have some realy special figure that does not work well with pumpkins. Therefor I ended up redesigning everything. However here comes my TicTac shaped pumpkin in a minion costume for your pleasure. As always, the model is designed to work with the printer in question for this contest, so the maximum diameter (of the pants) is 14 inch.
Instructions
The small parts can be printed without support. only the pumpkins half-bowls might need support in the center part as well as for the face. Also the glasses will need support.
After printing, simply put together all parts. The buttons also function to hold the pants, the straps as well as the pumpkin bowls at place. the hands have to be glued to the arms and then can be put as well as the shoes in the fitting holes.
What you will need to complete the model is a black rubber band (up to 10mm width) to attach the glasses properly.
License
Attribution - Creative Commons
Tags
Comments
Sign in to add a comment.