Rostock Max Effector Platform - Fan Shroud Combo
jimustanguitar
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| effector duct v2.stl | 1188 | 2.7 MB | on 2/12/15 | Download |
| 01 - v7vblpu.jpg | 1309 | 614 kB | on 2/12/15 | Download |
| 02 - tlxhxdj.jpg | 1295 | 545 kB | on 2/12/15 | Download |
| 03 - aswd1tk.jpg | 1338 | 425 kB | on 2/12/15 | Download |
| 04 - eosedwi.jpg | 1349 | 610 kB | on 2/12/15 | Download |
| 05 - zfqnbrr.jpg | 1402 | 454 kB | on 2/12/15 | Download |
| 06 - 3m6zez2.jpg | 1232 | 614 kB | on 2/12/15 | Download |
| 07 - uyjinbx.jpg | 1224 | 809 kB | on 2/12/15 | Download |
| 08 - ubxewrn.jpg | 1262 | 580 kB | on 2/12/15 | Download |
| 09 - wfsaaj4.jpg | 1468 | 631 kB | on 2/12/15 | Download |
| 10 - peujdev.jpg | 1236 | 629 kB | on 2/12/15 | Download |
Description
I designed this effector platform to hold three 30x10mm blower fans. The part is hollow on the inside and has a round opening on the bottom that's aimed to blow air on your part but not your hot-end.
The mechanical dimensions are the same as the SeeMeCNC platforms, the axle grooves also fit Trick Laser carbon fiber arms, and while I don't have a way to test the fit - I've included screw holes that should match up with the new ball and socket style arms from SeeMe.
License
Attribution - Share Alike - Creative Commons
Tags
