Nozzle ID Clips for the Rostock MAX with ball joint arms.
geneb
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| rostock max arm 0.30 label.stl | 715 | 75 kB | on 23/2/18 | Download |
| rostock max arm 0.35 label.stl | 726 | 70 kB | on 23/2/18 | Download |
| rostock max arm 0.40 label.stl | 813 | 55 kB | on 23/2/18 | Download |
| rostock max arm 0.50 label.stl | 754 | 66 kB | on 23/2/18 | Download |
| rostock max arm 0.60 label.stl | 791 | 68 kB | on 23/2/18 | Download |
| rostock max arm 0.80 label.stl | 761 | 83 kB | on 23/2/18 | Download |
| rostock max arm blank label.stl | 701 | 8 kB | on 23/2/18 | Download |
| rostock max arm 0.15 label.stl | 759 | 49 kB | on 23/2/18 | Download |
| rostock max arm 0.25 label.stl | 800 | 60 kB | on 23/2/18 | Download |
| dsc_7104.jpg | 739 | 2.5 MB | on 23/2/18 | Download |
| dsc_7106.jpg | 851 | 2.4 MB | on 23/2/18 | Download |
Description
If you get tired of turning your head upside down to count the dots on the nozzle or you can't remember what nozzle is on the machine, you can print one of these! The clips are designed to snugly fit the ball & socket arms used by the later Rostock MAX v2 and v3 3D printers.
This clip set is sized a bit smaller than the ones for the Artemis 300 (Repable #875).
Instructions
Rotate the model so the text is facing up and print with support.
The text prints better if you use a 0.4mm nozzle or smaller. The samples shown in the photos were printed with a 0.5mm nozzle.
License
Attribution - Non-Commercial - Creative Commons
Comments
Sign in to add a comment.