Transmitter Stick extension for Hubsan Zino
perdi
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| zino-stick-ext.stl | 1499 | 861 kB | on 26/5/19 | Download |
| stickex-k1-F.stl | 1464 | 22 kB | on 26/5/19 | Download |
| stickex-k2.stl | 1466 | 212 kB | on 26/5/19 | Download |
| IMG_20190525_124855447.jpg | 1389 | 335 kB | on 26/5/19 | Download |
| IMG_20190525_124900923 1.jpg | 1419 | 327 kB | on 26/5/19 | Download |
| IMG_20190525_124913354 1.jpg | 1445 | 441 kB | on 26/5/19 | Download |
| IMG_20190526_095623352.jpg | 1515 | 265 kB | on 26/5/19 | Download |
| IMG_20190526_095835281.jpg | 1392 | 287 kB | on 26/5/19 | Download |
Description
A stick extension leads to a gentle control behavior. In the middle the extension extends by 15mm. For example, a movement of the stick by 10 degrees now requires 2.65mm more movement of the stick. The zino has a yaw hard control this is easier and more responsive to control with an extension.
Instructions
Delicate deburring and depending on the printer with the settings vary
re = right li = left
License
Attribution - Non-Commercial - Share Alike
Tags
Comments
Sign in to add a comment.