DropLit 3D Printable Hardware
jjjohnson
Full Name JJ Johnson
Location United States
Company SeeMeCNC
FilenameDownloadsSizeUploaded
78703 Bearing Bushing.stl3922100 kBon 13/8/14 Download
78704 Eccentric Spacer_machined.stl381983 kBon 13/8/14 Download
78751 30mm projector riser_locator.stl0424 kBon 14/8/14 Download
78752 40mm projector riser_locator.stl0442 kBon 14/8/14 Download
Description
3D printable hardware for the DropLit. 8/14 - Added Projector Risers Standard and Eccentric bushings used in the SeeMeCNC DropLit. These fit R4 bearings. The eccentric bushing will utilize a 10mm open ended wrench for adjustment.
Instructions
As stated on the forum by johnoly99 "MAKE SURE you print the parts in PLA not ABS, as the resin can break down ABS parts if it gets soaked in the resin."
License
Attribution - Creative Commons
Comments
Sign in to add a comment.