DropLit 3D Printable Hardware
jjjohnson
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| 78703 Bearing Bushing.stl | 3958 | 100 kB | on 13/8/14 | Download |
| 78704 Eccentric Spacer_machined.stl | 3860 | 83 kB | on 13/8/14 | Download |
| 78751 30mm Projector Riser_Locator.stl | 0 | 424 kB | on 14/8/14 | Download |
| 78752 40mm Projector Riser_Locator.stl | 0 | 442 kB | on 14/8/14 | Download |
| 78748 Door Latch.stl | 2103 | 59 kB | on 14/8/14 | Download |
| 38710 m5 anti backlash nut carrier seemecnc.stl | 1517 | 79 kB | on 14/8/14 | Download |
| 40mm projector riser_locator.jpg | 1664 | 2.8 MB | on 14/8/14 | Download |
| 40mm projector riser_locator2.jpg | 1632 | 2.8 MB | on 14/8/14 | Download |
Description
3D printable hardware for the DropLit.
***8/14 - Added Projector Risers***
***8/14 - Added Door Latch***
Instructions
As stated on the forum by johnoly99 "MAKE SURE you print the parts in PLA not ABS, as the resin can break down ABS parts if it gets soaked in the resin."
License
Attribution - Creative Commons
Comments
Sign in to add a comment.