E3D v6 40mm Fan Duct
MechanizedMedic
Filename | Downloads | Size | Uploaded | |
---|---|---|---|---|
e3dv6_40mmductedshroud_v3_003.png | 7567 | 56 kB | on 8/10/14 | Download |
mainblock+nozzle_v3.stl | 2733 | 179 kB | on 8/10/14 | Download |
mainblock_nonozzle_v3.stl | 2731 | 153 kB | on 8/10/14 | Download |
ventedclip_v3.stl | 2695 | 71 kB | on 8/10/14 | Download |
e3dv6_40mmductedshroud_v3.fcstd | 2619 | 1.1 MB | on 8/10/14 | Download |
E3Dv6_40mmFanDuct.stl | 3 | 105 kB | on 6/10/14 | Download |
E3Dv6_40mmFanDuct_DualNozzle.stl | 4 | 456 kB | on 6/10/14 | Download |
E3Dv6_40mmFanDuct_LeftNozzle.stl | 3 | 285 kB | on 6/10/14 | Download |
E3Dv6_40mmFanDuct_RightNozzle.stl | 3 | 284 kB | on 6/10/14 | Download |
E3Dv6_40mmDuctedShroud_V2.fcstd | 4 | 4.1 MB | on 6/10/14 | Download |
Description
UPDATE: The first revision that I posted was fragile and tough to print. I started over from scratch and it's heaps better... The new design is denoted as "v3" in all file names.
I wanted to make a cooling shroud/duct that had cooling nozzles as well. In the process of doing so I made four variants. The STL files have not been rotated to lay flat on the printing surface since I have not yet decided what orientation would be best.
Instructions
Version 3: Should be easy to print, especially with support enabled.
Version 2: Good luck... I tried twice - once with Slic3r, once with Cura - and the nozzles don't slice or print well.
License
Creative Commons - GNU GPL
Comments
Sign in to add a comment.