E3D v6 40mm Fan Duct
MechanizedMedic
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| E3Dv6_40mmDuctedShroud_V3_003.png | 8204 | 56 kB | on 8/10/14 | Download |
| MainBlock+Nozzle_v3.stl | 3345 | 179 kB | on 8/10/14 | Download |
| MainBlock_NoNozzle_v3.stl | 3359 | 153 kB | on 8/10/14 | Download |
| VentedClip_v3.stl | 3292 | 71 kB | on 8/10/14 | Download |
| E3Dv6_40mmDuctedShroud_V3.fcstd | 3244 | 1.1 MB | on 8/10/14 | Download |
Description
UPDATE: The first revision that I posted was fragile and tough to print. I started over from scratch and it's heaps better... The new design is denoted as "v3" in all file names.
I wanted to make a cooling shroud/duct that had cooling nozzles as well. In the process of doing so I made four variants. The STL files have not been rotated to lay flat on the printing surface since I have not yet decided what orientation would be best.
Instructions
Version 3: Should be easy to print, especially with support enabled.
Version 2: Good luck... I tried twice - once with Slic3r, once with Cura - and the nozzles don't slice or print well.
License
Creative Commons - GNU GPL
Comments
Sign in to add a comment.