Designed to: 1. Reuse the stock fasteners. 2. Reuse the stock bottom plate. 3. Reuse the stock stand offs. 4. Incorporate press-in 1/4-20 threaded inserts from McMaster P/N 92395A116, 3 EA. 5. Firmly clamp hot end gland w/ 0.5mm detent features. 6. use nylon cable ties through rib features to retain cables.

Print with 3 layers on all external surfaces. Print w/ intervals of 0.5mm layer height. Assemble e3d fan assembly oriented over cartridge clamp. Insert assembly with fan facing away from clamp opening, then install to rostock bottom plate w/ original hot end hardware.

Attribution - Creative Commons

rostockmaxv2e3dv6hotendhotend