*V2 updates* Designed to: 1. Reuse the stock fasteners. 2. Reuse the stock bottom plate. 3. Reuse the stock stand offs. 4. Incorporate press-in *6-32* threaded inserts from McMaster P/N *92395A113*, 3 EA. 5. Firmly clamp hot end gland w/ 0.5mm detent features. 6. use nylon cable ties through rib features to retain cables.

Print with 3 layers on all external surfaces. Print w/ intervals of 0.5mm layer height. Install brass inserts from the bottom with the split side facing out. Install a fastener backwards to expand the insert into the part before assembly. Assemble e3d fan assembly oriented over cartridge clamp. Insert assembly with fan facing away from clamp opening, then install to rostock bottom plate w/ original hot end hardware.

Attribution - Creative Commons

rostockmaxv2e3dv6hotendhotend