58mm solar filter for DSLR
madhead
| Filename | Downloads | Size | Uploaded | |
|---|---|---|---|---|
| flange × 60 — female (3D).png | 2108 | 7 kB | on 14/3/19 | Download |
| flange × 60 — male (3D).png | 2021 | 7 kB | on 14/3/19 | Download |
| hood × 60 — (3D).png | 2003 | 6 kB | on 14/3/19 | Download |
| flange × 60 — female (3D).scad | 2029 | 655 bytes | on 14/3/19 | Download |
| flange × 60 — male (3D).scad | 2028 | 616 bytes | on 14/3/19 | Download |
| hood × 60 (3D).scad | 2047 | 781 bytes | on 14/3/19 | Download |
| Mennon DV-S 58.scad | 2050 | 904 bytes | on 14/3/19 | Download |
| flange × 60 — female (3D).stl | 2038 | 1.8 MB | on 14/3/19 | Download |
| flange × 60 — male (3D).stl | 2078 | 1.8 MB | on 14/3/19 | Download |
| hood × 60 (3D).stl | 2090 | 1.1 MB | on 14/3/19 | Download |
| IMG_20190314_040132.jpg | 1 | 3.9 MB | on 14/3/19 | Download |
| IMG_20190314_040338.jpg | 0 | 5.6 MB | on 14/3/19 | Download |
| IMG_20190314_040408.jpg | 1 | 4.2 MB | on 14/3/19 | Download |
| IMG_20190314_042143.jpg | 1 | 3 MB | on 14/3/19 | Download |
| IMG_20190314_042215.jpg | 1 | 3.5 MB | on 14/3/19 | Download |
| IMG_20190314_042232.jpg | 1 | 2.8 MB | on 14/3/19 | Download |
Description
58mm solar filter for DSLR
Instructions
Besides the printed parts you'll need:
- AstroSolar® Safety Film OD 5.0 (https://www.baader-planetarium.com/en/solar-observation/astrosolar-safety-film-od-5.0-(20x29-100x50-117x117-cm).html) or it's alternative.
- 58 mm screw-thread lens mount. I took my from a cheap replica of Mennon DV-S 58(http://www.mennon-usa.com/products/mennon-dv-s-58-screw-mount-58mm-digital-video-camcorder-lens-hood-with-cap-black.html).
- Three 4×6 mm bolts (or similar) with nuts.
- Cyanoacrylate glue ("Super Glue").
Print the parts with a heat-resistant white plastic tolerant to UV light and sandpaper them. Cut the bolting holes to fit your bolts. Cut a ø 70 mm circle (60 mm + 5 mm overlap) of the AstroSolar® Safety Film OD 5.0. Glue the film and one of the circle flange parts. Then glue the second flange part to the first so that the film is between two flanges. Cut the screw-threading part of the lens hood and sandpaper it too. Glue it to the triangle flange mount. Use bolts to connect the filter and the lens adapter together.
License
Attribution - Creative Commons
Comments
Sign in to add a comment.