58mm solar filter for DSLR
FilenameDownloadsSizeUploaded
flange × 60 — female (3D).png2487 kB8 months ago Download
flange × 60 — male (3D).png2057 kB8 months ago Download
hood × 60 — (3D).png2046 kB8 months ago Download
flange × 60 — female (3D).scad214655 bytes8 months ago Download
flange × 60 — male (3D).scad192616 bytes8 months ago Download
hood × 60 (3D).scad226781 bytes8 months ago Download
Mennon DV-S 58.scad200904 bytes8 months ago Download
flange × 60 — female (3D).stl2071.8 MB8 months ago Download
flange × 60 — male (3D).stl2271.8 MB8 months ago Download
hood × 60 (3D).stl2171.1 MB8 months ago Download
dsc00147.jpg136849 kB8 months ago Download
dsc00132.jpg1461.3 MB8 months ago Download
dsc00133.jpg1351.4 MB8 months ago Download
dsc00135.jpg1271.2 MB8 months ago Download
dsc00137.jpg1401.1 MB8 months ago Download
dsc00141.jpg141618 kB8 months ago Download
dsc00143.jpg148501 kB8 months ago Download
dsc00149.jpg139676 kB8 months ago Download
dsc00152.jpg139829 kB8 months ago Download
dsc00155.jpg218864 kB8 months ago Download
Description
58mm solar filter for DSLR
Instructions
Besides the printed parts you'll need: - AstroSolar® Safety Film OD 5.0 (https://www.baader-planetarium.com/en/solar-observation/astrosolar-safety-film-od-5.0-(20x29-100x50-117x117-cm).html) or it's alternative. - 58 mm screw-thread lens mount. I took my from a cheap replica of Mennon DV-S 58(http://www.mennon-usa.com/products/mennon-dv-s-58-screw-mount-58mm-digital-video-camcorder-lens-hood-with-cap-black.html). - Three 4×6 mm bolts (or similar) with nuts. - Cyanoacrylate glue ("Super Glue"). Print the parts with a heat-resistant white plastic tolerant to UV light and sandpaper them. Cut the bolting holes to fit your bolts. Cut a ø 70 mm circle (60 mm + 5 mm overlap) of the AstroSolar® Safety Film OD 5.0. Glue the film and one of the circle flange parts. Then glue the second flange part to the first so that the film is between two flanges. Cut the screw-threading part of the lens hood and sandpaper it too. Glue it to the triangle flange mount. Use bolts to connect the filter and the lens adapter together.
License
Attribution - Creative Commons
Comments
Sign in to add a comment.